Discover How These Fixtures Can Help You Save on Your Water Bill
You don’t have to stop after choosing an efficient water heater to save on your utility bills. In addition to opting for high-efficiency appliances, savvy homeowners select budget-friendly fixtures to increase their at-home savings. Here are the most impactful fixtures you need to save on water bills:
Pressure regulator valves
Cutting off waste at the source is a great way to lower water bills and improve your water efficiency. The pressure regulator or pressure reducer valve (PRV) connects to the main water line. Installing a PRV will reduce the overall pound per square inch (PSI) of your home’s plumbing. An acceptable pressure level for your plumbing system is between 30 and 80 PSI. Once that number gets too high, the pressure regulator valve lowers the flow rate and outlet pressure not to oversupply a property. Without this handy valve, you could be wasting thousands of gallons of water every year.
Water-efficient faucets
Try retrofitting your bathroom and kitchen faucets with a tap aerator for a faucet focused on water efficiency. The flow regulator is helpful as it adds a small amount of air into the water supply as it passes through the tap. By doing so, you use less water and experience little to no change in pressure. You can save between 2 and 16 gallons per day, depending on the type of aerator installed and your daily water usage.
Water-conserving toilets
Since the 1990s, the Environmental Protection Agency (EPA) has pushed for energy-saving toilets to replace our old-fashioned toilets. As a result, in the last decade, we have seen swift changes in how we flush bathroom waste, and for a good reason. Today’s water-conserving toilets and toilet fixtures include gravity assist toilets, pressure-assisted toilets, specialty tank inserts, and dual-flush toilets, to name a few. Opting for a budget-friendly, low-flush toilet or tank insert not only gets the job done with each flush but will also save you hundreds of dollars on water and plumbing issues.
Recirculating hot water kit
As a more considerable initial investment than many other water-saving fixtures discussed, a recirculating hot water system usually takes a few years to recoup its investment. However, the hot water recirculating system can get warm water quickly to where you need it by creating a loop from the water heater to the fixture and back. This is possible without wasting as much water as a regular heating system. In addition, this plumbing system usually works with your current water softener and other plumbing fixtures.
Low-flow showerheads
A standard showerhead uses roughly 2.5 gallons per minute (GPM), while a low-flow or performance showerhead uses about 1.75. If nearly 30% water savings isn’t reason enough to convert you, it may help to know that you won’t experience a difference in your shower pressure. Such an outstanding feat is due to the stellar showerhead design.
Upgrade your plumbing accessories and save!
As the national cost of water increases each year, it may feel like only depriving yourself of long showers can help. Fortunately, with today’s advancements in plumbing technology, you can still have a robust and relaxing shower while saving the planet and your bottom line at the same time.
If you need honest and experienced professional plumbing services for residential and afford commercial plumbing needs in Las Vegas, Henderson, and Enterprise give us a call at 702-766-3320.
